Tftp - Siemens SIMATIC NET SCALANCE SC-600 Configuration Manual

Configuring with Web Based Management
4.4 "System" menu
Follow the steps below to reuse configuration data:
1. Save the configuration data of a configured device on your PC.
2. Load these configuration files on all other devices you want to configure in this way.
3. If individual settings are necessary for specific devices, these must be made online on
the relevant device.
Note
Configuration data has a checksum. If you edit the files, you can no longer upload them
to the IE switch.
4.4.5.3

TFTP

Loading and saving data via a TFTP server
On this page, you can configure the TFTP server and the file names. The WBM also
allows you to store device data in an external file on your client PC or to load such data
from an external file from the PC to the devices. This means, for example, that you can
also load new firmware from a file located on your Admin PC.
On this page, the certificates required to establish a secure VPN connection can also be
loaded.
Firmware
The firmware is signed and encrypted. This ensures that only firmware created by
Siemens can be downloaded to the device.
Configuration files
Note
Configuration files and Trial mode/Automatic Save
In "Automatic Save" mode, the data is saved automatically before the configuration files
(ConfigPack and Config) are transferred.
In "Trial" mode, although the changes are adopted, they are not saved in the
configuration files (ConfigPack and Config). Use the "Write Startup Config" button on the
"System > Configuration" WBM page to save changes in the configuration files.
138
SCALANCE SC-600 Web Based Management (WBM)
Configuration Manual, 10/2021, C79000-G8976-C475-03