Sntp Client - Siemens SIMATIC NET SCALANCE SC-600 Configuration Manual

• End Date
Enter the following values for the end of daylight saving time:
– Hour
– Month
– Week
– Day
4.4.10.4

SNTP Client

Time-of-day synchronization in the network
SNTP (Simple Network Time Protocol) is used for synchronizing the time in the
network. The appropriate frames are sent by an SNTP server in the network.
Note
To avoid time jumps, make sure that there is only one time server in the network.
SCALANCE SC-600 Web Based Management (WBM)
Configuration Manual, 10/2021, C79000-G8976-C475-03
Enter the hour.
Enter the month.
Enter the week.
You can select the first to fourth or the last week of the month.
Enter the weekday.
Configuring with Web Based Management
4.4 "System" menu
185