Siemens SIMATIC NET SCALANCE SC-600 Configuration Manual page 355

Solution
1. Open the relevant STEP 7 project in STEP 7 Basic / Professional
2. Open the project view.
3. Select the device in the project tree.
4. Select the "Go to network view" command in the shortcut menu.
5. Select the device in the network view.
6. In the shortcut menu of the selected device select the command "SCALANCE
configuration > Save as start configuration".
Result
The configuration is saved on the device. The message is no longer visible in the display
area. A configuration change directly on the device is no longer lost due to a restart of
the device.
SCALANCE SC-600 Web Based Management (WBM)
Configuration Manual, 10/2021, C79000-G8976-C475-03
Exchange of configuration data with STEP7
6.2 Message: SINEMA configuration not yet accepted
355