Siemens SIMATIC NET SCALANCE SC-600 Configuration Manual page 317

Description
• IP Version
The version of the IP protocol.
• Rule set
Select the required rule set. Only the IP rules that are assigned to this rule set will
then be displayed in the table.
Requirement: "Show all" is disabled.
• Show all
When enabled, all available IP rules are displayed. With the "Assign" setting, you
assign an IP rule to the selected rule set.
The table contains the following columns:
• Select
Activate the check box in the row to be deleted.
• Protocol
Shows the version of the IP protocol.
• Action
Select how incoming IP packets are handled:
– "Accept" – The data packets can pass through.
– "Reject" – The data packets are rejected, and the sender receives a corresponding
– "Drop" – The data packets are discarded without any notification to the sender.
• From / To
Specify the communications direction of the IP rule.
– VLANx: VLANs with configured subnet
– Device: Connection to the device
– SINEMA RC: Connection to SINEMA RC Server
– IPsec: Either all IPsec connections or a specific IPsec connection
– OpenVPN: Either all OpenVPN connections or a specific OpenVPN connection
SCALANCE SC-600 Web Based Management (WBM)
Configuration Manual, 10/2021, C79000-G8976-C475-03
message.
Configuring with Web Based Management
4.7 "Security" menu
317