Crsp / Srs - Siemens SIMATIC NET SCALANCE SC-600 Configuration Manual

• Max. Link (50.0/125um) [m]
Shows the maximum distance in meters that is possible with this medium.
• Max. Link (62.5/125um) [m]
Shows the maximum distance in meters that is possible with this medium.
The following table shows the values of the SFP transceiver used in this port:
• Temperature [°C]
Shows the temperature of the interface module.
• Voltage [V]
Shows the voltage applied to the interface in volts.
• Current [mA]
Shows the current consumption of the interface in milliamperes.
• Rx Power [μW]/Rx Power [dBm]
Shows the receive power of the interface in microwatts/decibel milliwatts.
• Tx Power [μW]/Tx Power [dBm]
Shows the transmit power of the interface in microwatts/decibel milliwatts.
• Current column
Shows the current value.
• Low column
Shows the lowest value.
• High column
Shows the highest value.
4.4.20

cRSP / SRS

Note
Common Remote Service Platform (cRSP) / Siemens Remote Service (SRS) is a remote
maintenance platform via which remote maintenance access is possible.
To use the platform, additional service contracts are necessary and certain constraints
must be kept to. If you are interested in cRSP / SRS, call your local Siemens contact or
visit Web page (https://support.industry.siemens.com/cs/de/en/sc/2281).
On this page, you configure the access data for the SRS / cRSP acc. to URI syntax. The
Uniform Resource Identifier (URI) is defined in RFC 3986.
SCALANCE SC-600 Web Based Management (WBM)
Configuration Manual, 10/2021, C79000-G8976-C475-03
Configuring with Web Based Management
4.4 "System" menu
223