Activating System Programming; Remote Configuration - Siemens HiPath 1100 User Manual

Miscellaneous functions
Step by step
OPEN DOOR
qmme
82
p
Enter the entrance telephone extension (for example:
12/102).
or
Press the "OPEN DOOR" key a second time to open.

Activating system programming

The system programming mode allows extension 11 on
the HiPath1120/1150 and extension 101 on the HiPath
1190 to access the programming codes and change sys-
tem features.
qmi
Enter the programming code. (*95)
p
Enter your 5-digit password (the default is: 31994).
p
Enter the codes and their complements according to
Programming manual.

Remote configuration

The remote configuration feature allows remote config-
uration of the HiPath 1100.
Using an MF Telephone
Required: The programming extension must have a
conversation in progress with the remote programmer.
With a conversation in progress enter the programming
extension code to transfer control of the HiPath 1100 to
the remote programmer. (*991)
w
p
The remote programmer must now enter the system's
password on an MF telephone (the default is 31994)
and wait for a confirmation tone.
w
p
To set the required configuration, proceed as if the re-
mote telephone were locally connected to the system.
[1] If the system's serial port is connected to a modem with access to
a telephony network, and the remote PC has a modem installed,
remote configuration can be carried out using the HiPath 1100 Sys-
tem Manager application. Ask your support technician how to do
this.
1