Siemens SIMATIC NET SCALANCE SC-600 Configuration Manual page 270

Configuring with Web Based Management
4.6 "Layer 3" menu
• Destination Interface
Specify the destination interface.
– VLANx: VLANs with configured subnet
– SINEMA RC: Connection to SINEMA RC Server
– IPsec: Either all IPsec VPN connections (all) or a specific IPsec VPN connection
• Source IP Subnet
Enter the subnet of the sender.
The subnet can also be a single PC or another subset of the subnet. Use the CIDR
notation, for example, 192.168.10.10/32.
You can also specify the IP range with the start address "-" end address, e.g.,
192.168.100.10 - 192.168.100.20.
For the entire IP range, enter "*".
• Translated Source IP Subnet
Enter the subnet with which the subnet of the sender will be replaced. Can only be
edited in the "Source" settings.
The subnet can also be a single PC or another subset of the subnet. Use the CIDR
notation, for example, 192.168.10.10/32.
You can also specify the IP range with the start address "-" end address, e.g.,
192.168.100.10 - 192.168.100.20.
For the entire IP range, enter "*".
• Destination IP Subnet
Enter the subnet of the receiver.
The subnet can also be a single PC or another subset of the subnet. Use the CIDR
notation, for example, 192.168.10.10/32.
You can also specify the IP range with the start address "-" end address, e.g.,
192.168.100.10 - 192.168.100.20.
For the entire IP range, enter "*".
• Translated Destination IP Subnet
Enter the subnet with which the subnet of the receiver will be replaced. Can only be
edited with the setting "Destination".
The subnet can also be a single PC or another subset of the subnet. Use the CIDR
notation, for example, 192.168.10.10/32.
You can also specify the IP range with the start address "-" end address, e.g.,
192.168.100.10 - 192.168.100.20.
For the entire IP range, enter "*".
270
SCALANCE SC-600 Web Based Management (WBM)
Configuration Manual, 10/2021, C79000-G8976-C475-03