Stopping Intruder Flashing Leds In The Console - HP 10Base-T Hub 24M Manual

Figure 6-13. The Clear Security Blinking Port LEDs Option

Stopping Intruder Flashing LEDs in the Console

To stop LEDs from flashing in response to port intruders, using the Browser
Interface, perform the following steps:
From the Main Menu, type 1 and press [Enter]. The Hub Console
1.
Interface displays the Hub Status and Counters Menu.
From the Hub Status and Counters Menu, type 6 and press [Enter].
2.
The Hub Console Interface displays the following prompt:
Executing this command will clear all security
violations on the hub. Continue (Y/N)
Type Y and press [Enter]. All LEDs of ports that have registered
3.
intruder entries will stop flashing.
Configuration Reference
Before typing Y, make
sure to note from the
Intruder Log which
ports have experienced
intruders as LEDs will
no longer indicate
known intrusions by
flashing.
6-29