HP 10Base-T Hub 24M Manual page 121

Configuration Reference
The Device View graphic for HP 10Base-T Hubs contains the following graph-
ical objects:
Table 6-3.
6-64
The Browser Interface Device View Window
Select All Ports Button. Selects all ports on the hub graphic.
Selection is indicated by the ports being highlighted or darkened.
Deselect All Ports Button. Removes all ports from selected state.
Enable/Disable Button. Activates or renders inactive any selected
port on the hub graphic. This button acts as a toggle. If the port is
inactive, pressing this button will enable the port. If the port is active,
pressing this button will render the port inactive.
Enable Selected Ports Button. Activates any selected port.
Disable Selected Ports Button. Renders inactive any selected port.
Power LED. Always illuminates green to indicate that power is on. If
power is not on, you will not be able to display the Device View.
Fault LED. Illuminates orange in the event of a fault.
Port Region. A view of all RJ-45 ports on your hub. The ports can be in
one of three states, represented by one of three colors, detailed in the
following table.
Port State Color Key
Port State Color
Green (not
actual)
Gray
Gray with a blue
diagonal slash
Red (not actual) This port has been autopartitioned or othe port
Description
The port is enabled and detects Link Beat on a
device connected to the port.
The port is enabled, but does not detect Link
Beat.
The port is disabled.
has a security violation.