Menu: Viewing And Configuring Ip Authorized Managers - HP ProCurve 2910al Access Security Manual

ProCurve
==========================- CONSOLE - MANAGER MODE -============================
Authorized Manager IP
----------------------
10.10.240.2
10.10.245.3
10.10.246.200
10.10.245.30
Actions-> Back
Figure 14-1. Example of How to Add an Authorized Manager Entry
ProCurve
==========================- CONSOLE - MANAGER MODE -============================
Authorized Manager IP: 10.10.245.3
IP Mask [255.255.255.255]:255.255.255.255
Access Level:Operator
Actions-> Back
Figure 14-2. Example of Edit Menu for Authorized IP Managers
Menu: Viewing and Configuring IP Authorized
Managers
Only IPv4 is supported when using the menu to set the management access
method.
From the console Main Menu, select:
2. Switch Configuration ...
6. IP Authorized Managers
Switch Configuration - IP Managers
IP Mask
----------------------
255.255.255.255
255.255.255.255
255.255.255.255
255.255.255.0
Add Edit
Switch Configuration - IP Managers
Add Edit
Defining Authorized Management Stations
Access Level
------------
Manager
Operator
Operator
Operator
1. Select Add to add an authorized manager
to the list.
Delete Help
Enter an Authorized Manager IP address here.
Use the default mask to allow access by one
management device, or edit the mask to allow
access by a block of management devices. See
"Building IP Masks" on page 14-10.
Use the Space bar to select Manager or Operator
access.
Press [Enter], then [S] (for Save) to configure the
IP Authorized Manager entry.
Delete Help
Using Authorized IP Managers
22-Apr-2008 20:17:53
Access Method
-------------
all
ssh
tftp
ssh
22-Apr-2008 20:17:53
14-5