HP 10Base-T Hub 24M Manual page 151

Configuration Reference
The Ping Test fields in the Hub Console are as follows:
6-94
Number of Packets to Send. Indicates the number of times you want
the current device to attempt to test a connection with another device
before terminating further connection tests. Can be 1, 5, 10, or 20 on the
Browser Interface and 1 through 10,000 in the Hub Console Interface.
Timeout in Seconds. Indicates the number of seconds you want the
current device to attempt to test a connection with another device before
determining the current test shows a failed connection and reinitiating a
test. Can be between 1 through 30.
Start. Initiates the connectivity test.
Stop. Halts the Ping Test.
Defaults. Places default values for the connectivity test parameters. The
default values are:
Test Attempts. Indicates the number of times the hub tried to success-
fully send a packet to the test device.
Test Successes. Indicates he number of times the hub successfully sent
a packet to the test device.
Min Response Time (ms). Indicates the number of milliseconds of the
least time consuming packet sending test attempt.
Max Response Time (ms). Indicates the number of milliseconds of the
most time consuming packet sending test attempt.
Total Response Time (ms). Indicates the total number of milliseconds
for all packets sending test attempts.