Rebooting The Hub In The Console - HP 10Base-T Hub 24M Manual

Figure 6-50. The Reboot Hub Option

Rebooting the Hub in the Console

To reboot the hub, perform the following steps:
From the Main Menu, type 5 and press [Enter]. The Hub Console
1.
Interface displays the following prompt:
This will cause loss of console session. Reset Hub
[Y]/[N]):
If you are sure you want to reboot the hub, type Y and press [Enter]. The
2.
hub will reboot and the Hub Console Interface displays the following
prompt:
Disconnected.
Configuration Reference
Careful! Rebooting will
cause you to lose your
current Hub Console
session. Unlike the
Reset Hub option,
however, all values
will persist to the next
session.
6-111