Configuration Reference
5.
6-98
Type a number between 1 and 30 that indicates the number of seconds the
hub should wait for a response from the target device. Press [Enter].
The Hub Console Interface indicates the following information:
•
Test Attempts. The number of times the hub tried to successfully
send a packet to the test device.
•
Test Successes. The number of times the hub successfully sent a
packet to the test device.
•
Min Response Time (ms). The number of milliseconds of the least
time consuming packet sending test attempt.
•
Max Response Time (ms). The number of milliseconds of the most
time consuming packet sending test attempt.
•
Total Response Time (ms). The total number of milliseconds for
all packets sending test attempts.