Ipv6 Management Security Features; Usage Notes; Authorized Ip Managers For Ipv6 - HP 2520-8 Configuration Manual

IPv6 Management Security Features

This chapter describes management security features that are IPv6 counter-
parts of IPv4 management security features on the switches covered by this
guide.
Feature
configure authorized IP managers for IPv6
configuring secure shell for IPv6
enabling secure copy and secure FTP for IPv6
This chapter describes the following IPv6-enabled management security
features:

Authorized IP Managers for IPv6

■
Secure Shell for IPv6
■
■ Secure Copy and Secure FTP for IPv6
Authorized IP Managers for IPv6
The Authorized IP Managers feature uses IP addresses and masks to deter-
mine which stations (PCs or workstations) can access the switch through the
network. This feature supports switch access through:
■ Telnet and other terminal emulation applications
■ Web browser interface
SNMP (with a correct community name)
■
As with the configuration of IPv4 management stations, the Authorized IP
Managers for IPv6 feature allows you to specify the IPv6-based stations that
can access the switch.

Usage Notes

■ Up to ten authorized IPv4 and IPv6 manager addresses can be configured
on a switch, where each address applies to either a single management
station or a group of stations. Each authorized manager address consists
of an IPv4 or IPv6 address and a mask that determines the individual
management stations that are allowed access.
Default CLI
disabled 3-3
disabled 3-12
disabled 3-17
3
3-1