Figure 6-20. The Device Passwords Window
Setting Operator Usernames and Passwords in the Browser
Interface
To create an operator username and password, perform the following steps:
1.
From the Tab Bar, click on the Security Tab. The Browser Interface
displays the Security Button Bar.
2.
From the Security Button Bar, click on the Device Passwords Button. The
Browser Interface displays the Device Passwords Window.
3.
Click in the Operator User Name box and type a string. The string may be
separated by spaces and may include any ASCII character in it. The string
may be no longer than 15 characters, including spaces.
4.
Click in the Operator Password box and type a string. The string should
not have spaces, but may include any ASCII character in it. The string may
be no longer than 16 characters.
Note that spaces are allowed in the string (for example, Jeff Smith).
The string is not echoed in the window.
5.
Click in the Confirm Operator Password box and retype the string to
validate your entry.
Configuration Reference
You can set both
Operator (read access
only) and Manager
(read-write access)
level passwords in the
Browser Interface.
6-47