HP 10Base-T Hub 24M Manual page 119

Configuration Reference
4.
5.
6-62
To begin entering or changing one or all of these strings, perform the
appropriate step:
To enter a new system name, type N and press [Enter].
•
To enter a new system contact, type C and press [Enter].
•
To enter a new system location, type L and press [Enter].
•
• Using system name as an example, the Hub Console Interface displays
the following prompt:
Enter in new system location:
Type in any string and press [Enter]. The string can include spaces
and any ASCII character. It can be as long as 255 characters. You have
now created a new system parameter.