HP 10Base-T Hub 24M Manual page 35

Running the Browser Interface
Click on the First Time Install alert. The Browser Interface displays the First-
Time Install Window.
Figure 4-2. The First Time Install Window
This window is the launching point for the basic configuration you need to
perform to set Browser Interface access parameters and Fault Detection
policy for future use with the Browser Interface. To set Fault Detection policy,
click on the jump string select fault detection in the second bullet in
the window and go to the section, "Setting Fault Detection Policy" later in this
chapter. To set Browser Interface access parameters, click on the jump string
secure access to the device to display the Device Passwords Window
and go to the next section.
4-4