Hp Advancestack Assistant - HP 10Base-T Hub 24M Manual

HP AdvanceStack Assistant

The manageable HP 10Base-T Hubs enable you to use HP AdvanceStack
Assistant (HP ASA). Operate HP ASA from a PC on the network to monitor
traffic and manager your hubs and switches. Easy to install and use, HP ASA
(formerly HP Interconnect Manager) is the answer to your management
challenges.
Network Devices:
Enables fast installation of hubs and switches.
Notifies you when HP hubs and switches use "self-healing" features to fix
or limit common network problems.
Identifies users by port and lets you assign easy-to-remember names to
any network device.
Enables you to configure and monitor network devices from your PC.
Network Traffic:
Shows traffic and "top talker" nodes right on screen.
Traffic monitor diagrams make bottlenecks easy to see.
Real-time fault isolation improves network reliability.
See your entire network without having to put RMON probes on every
segment (up to 50 segments).
Network Growth:
Automatically monitors, stores, and analyzes network traffic to determine
where upgrades are needed.
Network Performance Advisor gives clear, easy-to-follow plans detailing
the most cost-effective way to upgrade your network.
About Hub Management Interfaces
1-3