Setting Browser Interface Access On The Hub In The Console - HP 10Base-T Hub 24M Manual

Figure 6-23. The Web Enable/Disable Option

Setting Browser Interface Access on the Hub in the Console

To control Browser Interface access capability on the hub, perform the
following steps:
From the Main Menu, type 2 and press [Enter]. The Hub Console
1.
Interface displays the Management Access Configuration Screen.
2. From the Management Access Configuration Screen, type 5 and press
[Enter]. The Hub Console Interface will respond in one of two ways,
depending on what state your Telnet control feature has been set.
• If the Browser Interface is current disabled, the Hub Console Inter-
face displays the following prompt:
Web accesses is currently Disabled.
(E)nable or (D)isable Telnet:
Type E and press [Enter] to enable the Browser Interface feature. You may
now establish a Browser Interface session with the hub. See chapter 2 for
more information on running a Browser Interface session with the hub.
• If you have already enabled the Browser Interface feature, the Hub
Console Interface will display the following prompt:
Web accesses is current enabled
If you want to disable it, type D and press [Enter]. You may not establish
•
a Browser Interface session with the hub now.
If you choose to disable
web access, make sure
to alert all users who
may want to use the
Browser Interface to
manage the hub.
Configuration Reference
6-53