HP 10Base-T Hub 24M Manual page 123

Configuration Reference
4.
5.
6-66
To enable a port that is disabled, click the left mouse button on a gray-
colored port. The Browser Interface highlights the port a blue border,
indicating the port has been selected. The port can display one of two
states:
• green, indicating the port is enabled and detects Link Beat from
another device connected to port. This state means the port is func-
tioning properly.
• gray with a blue diagonal slash through it, indicating the port is
enabled, but does not detect Link Beat from another device. This state
means the port either does not have a cable from another device
plugged in to it, or the connecting device is faulty.
• red, indicating the port has been autopartitioned or the port has a
security violation.
To disable a port that is enabled, click the left mouse button a green-
colored port or a gray-colored port with a diagonal slash through it. The
port color turns to gray, indicating it can no longer connect to another
device.