Viewing The Port Settings In The Console - HP 10Base-T Hub 24M Manual

Configuration Reference
Figure 6-6. The Port Status Screen

Viewing the Port Settings in the Console

To view settings in the Port Status Screen in the Hub Console Interface,
perform the following steps:
1.
2.
In the example shown, ports 1 and 4 are active and the Link Beat signal has
been detected, indicating a valid 10Base-T connection has been made for both.
MAC addresses for devices connected to both ports are listed in the Last Heard
Source Address column and no security violation has been recorded for either
port.
6-14
Ports 1 and 4 have a
device connected to
them.
From the Main Menu, type 1 and press [Enter]. The Hub Console
Interface displays the Hub Status and Counters Menu.
From the Hub Status and Counters Menu, type 2 and press [Enter].
The Hub Console Interface displays the Port Status Screen.
MAC addresses of
devices connected to
ports 1 and 4 display.