HP 10Base-T Hub 24M Manual page 53

Running the Browser Interface
High Automation. The most sensitive of the settings, this policy directs the
hub to send all alerts to the Alert Log and to disable the offending port in
instances of severe network disruption.
Sample Scenario
Medium Automation. The middle sensitive of the settings, this policy directs
the hub to send alerts related to network problems to the Alert Log and to
disable ports in instances of extreme network disruption. If you want to be
notified of problems which cause a noticeable slowdown on the network, use
this setting. Ports which are affecting the network are disabled.
Sample Scenario
Low Automation. The least sensitive of the settings, this policy directs the
hub to send only the most severe alerts to the Alert Log and to rarely or never
disable a port generating the alert.
Sample Scenario
The Fault Detection Window also contains three Change Control Buttons.
They are:
4-22
You have a network with no or very few problems. You
can use high automation Fault Detection settings to take
action on any deetrimental network event.
You have a network with no or very few problems. You
can use medium automation Fault Detection settings to
take action on only the most severe problems.
You do not want the device taking any actions on its own,
but you still want it to let you know about network
problems. You can use low automation Fault Detection
settings to initiate problem reporting.
Apply Changes. This button stores the settings you have selected for all
future sessions with the Browser Interface until you decide to change
them.
Clear Changes. This button removes your settings and returns the
settings for both list boxes to the levels they were at in the last saved
detection setting session.
Reset to Default Settings. This button reverts the settings for both list
boxes to Medium Sensitivity for Log Network Problems and Never for
Disable Problem Ports.