Hardware Installation - ATEN CN9000 User Manual

CN9000/CN9600/CN9900/CN9950 User Manual

Hardware Installation

Follow the steps below and refer to the diagram on the following page (the
steps and the numbers correspond to each other) for hardware installation.
1. Connect the unit's grounding terminal to a suitable grounded object.
2. Plug your keyboard, mouse, monitor display, speakers and microphone
into the local console port section located on the rear panel.
3. By using the KVM cable provided with the package, connect the unit's
PC/KVM andaudio ports to the keyboard, video, mouse, speakers and
microphone ports of the server or KVM switch that you are installing.
4. (Optional) If you wish to access locally using the Laptop USB Console
(LUC) function, use the USB Type-A to USB Mini-B cable provided to
connect a USB port of the laptop to this (LUC) port.
Make sure you have set the mode in USB IO Setting to LUC. See p. 68.
5. (Optional) If you are using other serial devices (data terminal equipment)
such as a touch panel, connect it to the Local Console COM (RS-232
DCE) Port with a network switch console cable.
6. (Optional) If you are using other serial devices (data communication
equipment) such as a PC, connect it to the CPU COM (RS-232 DTE) Port
with a serialRS-232 DB-9 to RJ-45 Cat5 Ethernet adapter network
modem/switch/router cable.
7. Plug a network cable into one of the unit's LAN ports.
8. (Optional) Plug a second network cable into the other LAN port for dual
LAN operation.
9. (Optional) For CN9000/CN9900/CN9950, connect the NC and C
terminals to the server or PC for remote reboot operation (to be supported
by upcoming firmware upgrade).
10. (Optional) For CN9000/CN9900/CN9950, connect the GND and DI
terminals to an input device (e.g. thermometer, humidity sensor) for digital
input notification (to be supported by upcoming firmware upgrade).
11. Plug the power adapter provided with this package into an AC power
source and plug the power adapter cable into one of the unit's power jacks.
Now the CN9000/CN9600/CN9900/CN9950 is turned on.
12. (Optional) Plug another power adapter into an AC power source and plug
the power cable into the other power jack for dual power operation.
20