1. Important safety information regarding the placement of this
device is provided on page 131. Please review it before
proceeding.
2. Make sure that the power to any device that you connect to the
installation has been turned off. You must unplug the power
cords of any computers that have the Keyboard Power On
function.
3. Any installation that does not follow the instructions in this
guide may be hazardous.
4. The power source for this product is intended to be supplied by a
power adapter only, not a DC mains.
Mounting
The CN9000/CN9600/CN9900/CN9950 can be mounted on most standard 19"
(1U) racks or mounted on a wall. The following illustrations are exemplified
using CN9600.
Attaching the Bracket
1. Detach the screws from the underside of the unit as shown:
2. Attach the bracket and secure the bracket using the screws from the
previous step.
Hardware Setup
M3 x 5
Chapter 2
17