Smtp Settings - ATEN CN9000 User Manual

CN9000/CN9600/CN9900/CN9950 User Manual
 SMTP Settings
To have the CN9000/CN9600/CN9900/CN9950 email reports from the SMTP
server to you, do the following:
1. Check Enable report from the following SMTP server and key in the IP
address and service port of your SMTP server.
2. If you're connecting to a secure server, check My server requires secure
connection (SSL).
3. If your server requires authentication, check My server requires
authentication and key in the appropriate account information in the
Account Name and Password fields.
4. Key in the email address of where the report is being sent from in the
From field.
Note: Only one email address is allowed in the From field, and it cannot
exceed 64 English alphanumeric character.
5. Key in the email address (addresses) of where you want the SMTP reports
sent to in the To field.
Note: If you are sending the report to more than one email address,
separate the addresses with a semicolon. The total cannot exceed
256 English alphanumeric character.
6. Check the information below if you wish to include them in the report
email:
 Report IP Address
 Report system reboot
 Report user login
 Report user logout
46