Sun Systems - ATEN CN9000 User Manual

CN9000/CN9600/CN9900/CN9950 User Manual

Sun Systems

Problem
Video display problems with
HDB15 interface systems (e.g.,
Sun Blade 1000 servers).
Video display problems with
13W3 interface systems (e.g.,
Sun Ultra servers).*
The local and remote mouse
pointers do not sync
* These solutions work for most common Sun VGA cards. If using them fails
to resolve the problem, consult the Sun VGA card's manual.
152
The display resolution should be set to 1024 x 768:
Under Text Mode:
1
1. Go to OK mode and issue the following com-
mands:
setenv output-device screen:r1024x768x60
reset-all
Under XWindow:
1. Open a console and issue the following command:
m64config -res 1024x768x60
2. Log out
3. Log in
The display resolution should be set to 1024 x 768:
Under Text Mode:
1. Go to OK mode and issue the following com-
mands:
setenv output-device screen:r1024x768x60
reset-all
Under XWindow:
1. Open a console and issue the following command:
m64config -res 1024x768x60
2. Log out
3. Log in
The default configuration is for the local and remote
mouse pointers to automatically sync when you
connect. Automatic mouse sync only supports USB
mice on Windows and Mac (G4 or higher) systems,
however. You must select Manual as the Mouse
DynaSync Mode choice, and sync the pointers
manually. See Mouse DynaSync Mode, page 104 for
further details.
Resolution