CN9000/CN9600/CN9900/CN9950 User Manual
Filter
IP and MAC Filters control access to the CN9000/CN9600/CN9900/CN9950
based on the IP and/or MAC addresses of the computers attempting to connect.
A maximum of 100 IP filters and 100 MAC filters are allowed. If any filters
have been configured, they appear in the IP Filter and/or MAC Filter list boxes.
To enable IP and/or MAC filtering, check IP Filter Enable and/or MAC
Filter Enable.
If the Include button is checked, all the addresses within the filter range
are allowed access while all other addresses are denied.
If the Exclude button is checked, all the addresses within the filter range
are denied access while all other addresses are allowed.
Adding Filters
To add an IP filter, do the following:
1. Click Add, enter the IP address range you want to filter and click OK.
2. Repeat these steps for any additional IP addresses you want to filter.
52