Table of Contents
Advertisement
CN9000/CN9600/CN9900/CN9950 User Manual
Note: 1. If the list is empty, or your device doesn't appear, click
Enumerate to refresh the Device List.
2. If there is more than one device in the list, use the MAC address
to pick the one you want. The CN9000/CN9600/CN9900/
CN9950's MAC address is located on its bottom panel.
4. Select either Obtain an IP address automatically (DHCP), or Specify an
IP address. If you chose the latter, fill the IP Address, Subnet Mask, and
Gateway fields with the information appropriate to your network.
5. Click Set IP.
6. After the IP address shows up in the Device List, click Exit.
Browser
1. Set your computer's IP address to 192.168.0.XXX
Where XXX represents any number or numbers except 60. (192.168.0.60 is
the default address of the CN9000/CN9600/CN9900/CN9950.)
2. Specify the switch's default IP address (192.168.0.60) in your browser, and
you will be able to connect.
3. Assign a fixed IP address for the CN9000/CN9600/CN9900/CN9950 that
is suitable for the network segment that it resides on.
4. After you log out, reset your computer's IP address to its original value.
AP Windows Client
For computers running Windows, the CN9000/CN9600/CN9900/CN9950's IP
address can be determined with the Windows AP program (see The Windows
Client AP, page 77). When you run the program it searches the network
segment for CN9000/CN9600/CN9900/CN9950 devices, and displays the
results in a dialog box similar to the one below:
136
Advertisement
Table of Contents
