Table of Contents
Advertisement
CN9600 Front View
No.
Component
1
PC/KVM Port
2
CPU COM
(RS-232 DTE)
Port
3
Local Console
COM (RS-232
DCE) Port
4
USB Type-B
Port
5
Laptop USB
Console (LUC)
Port
6
Reset button
7
Power LED
Use the KVM cable provided with this package that links the
CN9000/CN9600/CN9900/CN9950 to your PC / Server for this
port.
Connect the DVI video display, microphone and speakers to
the server or the KVM switch you are installing. Each
connector is color coded and marked with an appropriate icon.
Connect a serial data communication equipment device (e.g. a
modem or PC) to this port. See page 24 for details.
Connect a serial data terminal equipment device (e.g. a PC or
touch panel) to this port. See page 24 for details.
Connect the keyboard/mouse to the server or the KVM switch
you are installing using the USB Type-A to USB Type-B cable
provided.
For laptop local access (See Local Access, page 115),
connect the laptop to this port using the USB Type-A to USB
Mini-B cable provided.
Make sure the mode of USB IO Settings (see USB IO
Settings, page 68) is set to LUC.
If the mode of USB IO Settings is set to Virtual Media, this port
will not work.
Press the Reset button for more than three (3) seconds to
revert to factory settings.
Lights Green when the CN9000/CN9600/CN9900/CN9950 is
powered up.
Chapter 1. Introduction
Description
15
Advertisement
Table of Contents
