Advanced Setting; Device Information; General - ATEN CN9000 User Manual

Advanced Setting

The following sections describe the administration utilities covered under
Advanced Setting, including the Device Information, Network, ANMS,
Security, Console Management, Date/Time, Customization screens.

Device Information

The Device Information screen provides information about the CN9000/
CN9600/CN9900/CN9950's status. You can change the device name in this
screen.

General

 Device Name: To make it easier to manage installations that have more
than one CN9000/CN9600/CN9900/CN9950, each one can be given a
name. Enter a name (16 characters max.) for the CN9000/CN9600/
CN9900/CN9950 then click Save.
 MAC (1, 2) Address: The CN9000/CN9600/CN9900/CN9950's MAC
Address displays here.
 Firmware Version / FPGA: Indicates the CN9000/CN9600/CN9900/
CN9950's current firmware version and build date. New versions of the
CN9000/CN9600/CN9900/CN9950's firmware can be downloaded from
our website as they become available (see Upgrade Main Firmware,
page 34). You can reference this number to see if there are newer versions
available on the website.
 IP Address: Displays the CN9000/CN9600/CN9900/CN9950's Internet
Protocol Version 4 (32 bit) address (in the legacy format).
 Subnet Mask: This is the subnet mask for the IP connection.
 Gateway: This is the CN9000/CN9600/CN9900/CN9950's gateway
address.
Chapter 4. Configuration
39