Table of Contents
Advertisement
CN9000/CN9600/CN9900/CN9950 User Manual
Virtual Media
The Virtual Media feature allows a drive, folder, image file, or
removable disk on a local client computer to appear and act as if it were
installed on the remote server. To enable this function, set the mode under USB
IO Settings, page 68 to "Virtual Media" first.
Virtual Media also supports smart card reader function, allowing a reader
connected to the client PC to appear as if plugged into the remote server.
Virtual Media Icons
The Virtual Media icon on the Control Panel changes to indicate whether the
virtual media function is available, or if a virtual media device has already been
mounted on the remote server, as shown in the table below:
Icon
The icon displays as shown on the left to indicate that the virtual
media function is disabled or not available.
The icon displays as shown on the left to indicate that the virtual
media function is available. Click the icon to bring up the virtual
media dialog box.
The icon displays as shown on the left to indicate that a virtual media
device has been mounted on the remote server. Click the icon to
unmount all redirected devices.
Virtual Media Redirection
To implement the virtual media redirection feature, do the following:
1. Click the Virtual Media icon to bring up the Virtual Media dialog box:
98
Function
Advertisement
Table of Contents
