Table of Contents
Advertisement
Option
Video Quality
Enable Refresh
Transparency
Color Depth Control This setting determines the richness of the video display by
Click OK to save your changes and close the dialog box.
Click Cancel to abandon your changes and close the dialog box.
Note: For best results, change the gamma while viewing a remote computer.
Drag the slider bar to adjust the overall video quality. The larger
the value, the clearer the picture and the more video data goes
through the network. Depending on the network bandwidth, a
high value may adversely affect response time.
The CN9000/CN9600/CN9900/CN9950 can redraw the screen
every 1 to 99 seconds, eliminating unwanted artifacts from the
screen. Select Enable Refresh and enter a number from 1
through 99. The CN9000/CN9600/CN9900/CN9950 will redraw
the screen at the interval you specify. This feature is disabled by
default. Click to put a check mark in the box next to Enable
Refresh to enable this feature.
Note: 1. The switch starts counting the time interval when
mouse movement stops.
2. Enabling this feature increases the volume of video
data transmitted over the network. The lower the
number specified, the more often the video data is
transmitted. Setting too low a value may adversely
affect overall operating responsiveness.
Drag the slider bars to adjust the transparency of the control
panel.
adjusting the amount of color information.
Chapter 6. The Windows Client Viewer
Usage
95
Advertisement
Table of Contents
