Table of Contents
Advertisement
CN9000/CN9600/CN9900/CN9950 User Manual
Item
Admin DN
Admin Name
Password
Search DN
Use the following keyword for Radius and LDAP setting: su/[username]
– the username must be a real user account that exists in the local account.
For CN9600 and CN9000/CN9900/CN9950, respectively use iKVM50-
userProfile and iKVM57-userProfile as LDAP attribute and su/
[username] as its attribute value.
CC Management Settings
To allow authorization for the CN9000/CN9600/CN9900/CN9950 through a
CC (Control Center) server, check Enable and fill in the CC Server's IP address
and the port that it listens on in the appropriate fields.
Note: Authentication refers to determining the authenticity of the person
logging in. Authorization refers to assigning permission to use the
device's various functions.
50
Consult the LDAP / LDAPS administrator to ascertain the
appropriate entry for this field. For example, the entry might
look like this:
cn=LDAPAdmin,ou=cn9600,dc=aten,dc=com
Key in the Group Name for CN9000/CN9600/CN9900/CN9950
administrator users.
Key in the LDAP administrator's password.
Set the distinguished name of the search base. This is the
domain name where the search starts for user names.
If Enable Authorization is not checked, this field must include
the entry where the CN9000/CN9600/CN9900/CN9950 Admin
Group is created. Consult the LDAP / LDAPS administrator to
ascertain the appropriate value.
Action
Advertisement
Table of Contents
