System Requirements; Remote User Computers; Servers - ATEN CN9000 User Manual

CN9000/CN9600/CN9900/CN9950 User Manual

System Requirements

Remote User Computers

Remote user computers (also referred to as client computers) are the ones the
users log into the switch with from remote locations over the Internet. The
following equipment must be installed on these computers:
 The computers used to access the switch have at least a P III 1 GHz
processor, with their screen resolution set to 1024 x 768. It is
recommended that your PC has P IV 2 GHz and at least 1 Gb of RAM.
 Browsers must support TLS 1.2 encryption.
 A network transfer speed of at least 128 kbps is required.
 For the Log Server, you must have the Microsoft Jet OLEDB 4.0 or higher
driver installed.

Servers

Servers are the computers connected to the switch via KVM cables. The
following equipment must be installed on these servers:
 For USB KVM Cable Connections: a USB Type-A port and USB host
controller
 For Virtual Media Connection: an extra USB Type-A and USB host
controller
6