Table of Contents
Advertisement
CN9000/CN9600/CN9900/CN9950 User Manual
Components
CN9000 Front View
No.
Component
1
PC/KVM Port
2
KVM Audio
Ports
3
CPU COM
(RS-232 DTE)
Port
4
Local Console
COM (RS-232
DCE) Port
5
Laptop USB
Console (LUC)
Port
6
Reset button
7
Power LED
10
Use the KVM cable provided to connect the PC / server to the
CN9000 through this port.
Connect the KVM VGA (SPHD) port to the server or the KVM
switch you are installing for keyboard, video and mouse signal
transmission.
Note: For keyboard and mouse signal transmission, users can
choose between PS/2 or USB connections.
Connect the audio of the PC / server to this port for audio
signal transmission.
Connect a serial data communication equipment device (e.g. a
modem or PC) to this port. See page 24 for details.
Connect a serial data terminal equipment device (e.g. a PC or
touch panel) to this port. See page 24 for details.
For laptop local access (See Local Access, page 115),
connect the laptop to this port using the USB Type-A to USB
Mini-B cable provided.
Make sure the mode of USB IO Settings (see USB IO
Settings, page 68) is set to LUC.
If the mode of USB IO Settings is set to Virtual Media, this port
will not work.
Press the Reset button for more than three (3) seconds to
revert to factory settings.
Lights Green when the CN9000 is powered up.
Description
Advertisement
Table of Contents
