CN9000 Rear View
No.
Component
1
Grounding Terminal
2
Power Jacks
3
Control Terminal
(to be supported by
upcoming firmware
upgrade)
4
LAN Ports
5
Local Console Port
Connect to a suitable grounding object.
Plug the power adapter provided with this package into
an AC power source, then plug the power adapter
cable into any power jack.
Plug another power adapter into an AC power source,
then plug the power cable into the other CN9000
power jack.
Note: Dual power operation is optional – the second
power source is for back-up; a second power adapter
requires a separate purchase.
Connect the NC and C terminals to the PC / server for
remote reboot.
Connect the GND and DI terminals to an input device
(e.g. thermometer, humidity sensor) for digital input
notification.
Connect a Cat 5e/6 network cable to these ports for
uplink connection.
Connect the cable for the local console (USB
keyboard, VGA monitor, USB mouse, microphone and
speakers) to this port. Each connector is color coded
and marked with an appropriate icon.
Chapter 1. Introduction
Description
11