Hook Switch Pcb (For Models With Handset) - Brother MFC260C Service Manual

6.1.14 Hook Switch PCB
(1) Make sure that the MJ/PS shield box has been removed.
(2) Make sure that the hook switch harness has been disconnected from the main PCB.
(3) Release the hook switch actuator from the lower cover, turn it counterclockwise (viewed from
the left), and remove it together with the spring.
Hook switch actuator
(4) Place the machine on its right end and support it by hand.
(5) Press the latch (the black plastic part on the lower cover) that locks the bottom of the hook
switch PCB, to release the PCB.
(for models with handset)
Lower cover
Bottom of hook switch PCB
Latch
Lower cover
Viewed from the bottom
Hook switch PCB
Spring
6 - 4 7
(6_39_3_J)
(6_39_4_J)
Confidential