Brother MFC260C Service Manual page 420

Selector
No.
1
Not used.
2
3
| Masking of symbol rate(s)
8
NOTE: WSW40 takes effect only when the V.34 mode is permitted (WSW19, selector 7) in models
supporting V.34 mode.
Selectors 3 through 8: Masking of symbol rate(s)
These selectors allow you to limit the transmission speed range in V.34 mode by masking the desired
symbol rate(s). Transmission speeds assigned to the symbol rates are listed on the next page. The
setting made by these selectors will limit the setting made by selectors 1 through 4 on WSW39.
If selector 3 is set to "1" to mask the 3429 symbols/second when the first transmission speed choice
is 33,600 bps (specified by selectors 1 through 4 on WSW39), for example, then the allowable
maximum transmission speed will be limited to 31,200 bps. If selector 8 is set to "1" to mask the
2400 symbols/second when the first transmission speed choice is 33,600 bps, then the allowable
maximum transmission speed remains 33,600 bps.
If selector 8 is set to "1" to mask the 2400 symbols/second when the first transmission speed choice
is 21,600 bps (specified by selectors 1 through 4 on WSW39), then the allowable maximum
transmission speed remains 21,600 bps but the minimum transmission speed will be limited to 4,800
bps.
WSW40
(V.34 modem settings) (Not used.)
Function
App. 4-44
Setting and Specifications
Not masking Masking
No. 3 0
No. 4 0
No. 5 0
No. 6 0
No. 7 -
No. 8 0
1 3429 symbols/sec
1 3200 symbols/sec
1 3000 symbols/sec
1 2800 symbols/sec
- Not used.
1 2400 symbols/sec
sec: second(s)
Confidential