Brother MFC260C Service Manual page 180

Document pull-in roller and document separation roller
(17) Press the lock arm on the document roller holder and pull out the separation roller gear.
(18) Remove the screw that secures the document roller holder.
(19) Release the two tabs on the left end of the document roller holder from the ADF unit and take
it out.
(20) Remove the document pull-in roller and document separation roller from the document roller
holder.
Apply grease here.
Document separation roller
Lock arm
Document roller holder
Tabs
(Front)
ADF unit
(placed upside down)
Document pull-in roller
Document roller holder
Taptite, cup B
M3x10
6 - 2 1
Apply grease here.
Lock arm
Document front
sensor harness
(Rear)
Separation roller gear
(6_20)
Confidential