Handset Mount And Hook Switch Pcb (For Models Except The Fax-8250P/Mfc-9050) Side Cover (For The Fax-8250P/Mfc-9050 - Brother 8250P - FAX B/W Laser Printer Service Manual

1.9 Handset Mount and Hook Switch PCB (for models except the FAX-8250P/MFC-9050)
Side Cover (for the FAX-8250P/MFC-9050)
(1) Open the top cover.
(2) Remove one of two screws from each of right and left top cover stoppers, then fully open the
top cover.
(3) Remove the two screws from the handset mount* or side cover**.
(4) Twist the handset mount* or side cover** so that it tilts over to the left and its upper end works
out of the bosses provided on the main cover.
NOTE: Do not pull the handset mount* away from the main cover. The hook switch harness*
is connected to the main PCB in the main cover.
*For models except the FAX-8250P/MFC-9050
IV - 24
**For the FAX-8250P/MFC-9050