A7.1 Deleting Personal Info from the Machine
The personal information in the machine is recorded in the EEPROM on the main PCB. It cannot be
deleted all by a single operation. Use Function code 01 in the maintenance mode, unplug the power
cord from the electrical outlet, and disconnect the backup battery*.
[ 1 ] Using Function code 01
Using Function code 01 (EEPROM parameter initialization) in the maintenance mode deletes the
following data that have been recorded in the main PCB:
- Activity report
- Station ID data
- Outside line number
- One-touch dialing
- Speed dialing
- Group dialing
- Call transfer data
Operating Procedure
(1) On the machine, press the Menu and Black Start (Mono Start) keys in this order. Next press
the
key four times to make the machine enter the maintenance mode.
TIP: FAX models equipped with a numerical keypad can enter the maintenance mode in the
same way as conventional models; that is, by pressing the Menu, *, 2, 8, 6 and 4 keys in this
order.
(2) Press the 0 and 1 keys in this order.
Parameter initialization starts and the "PARAMETER INIT" appears on the LCD.
(3) Upon completion of parameter initialization, the machine returns to the initial stage of the
maintenance mode.
[ 2 ] Unplugging the power cord from the electrical outlet and disconnecting the backup battery*
Unplugging the power cord from the electrical outlet and disconnecting the backup battery* deletes
the Caller ID list, fax data received into memory, transmission verification report (for image),
broadcasting report and batch transmission data (in the memory).
Operating Procedure
(1) Unplug the power cord from the electrical outlet.
(2) For models with backup battery, disconnect the backup battery harness from the main PCB (see
Chapter
(3) Leave the machine for approx. 24 hours.
6).
Ap p. 7- 1
*For models with backup battery
*For models with backup battery
Confidential