Brother MFC260C Service Manual page 187

For models with monochrome LCD
(1) Place the control panel ASSY upside down.
(2) Pull four latches "x" and remove the control panel PCB.
NOTE: Do not pull the control panel PCB away from the control panel base since it is
connected to the monochrome LCD mounted on the control panel base with a short panel-LCD
flat cable.
(3) Disconnect the panel-LCD flat cable from the control panel PCB after releasing the connector
lock.
(4) Remove the three rubber keypads and the keys.
(5) Remove the monochrome LCD by releasing the two lock arms.
(6) Remove the control panel from the control panel base by releasing eight latches "y."
Panel-LCD flat cable
Rubber keypad
Lock arms
Control panel PCB
Rubber keypad
Keys
Latches "x"
Latches "y"
Monochrome LCD
Rubber keypad
Latches "y"
Control panel
6 - 2 8
Panel-main harness
Control panel base
Latches "x"
(6_29_e)
Confidential