Brother MFC260C Service Manual page 356

9.2.3.3 Checking of Cordless Handset ID Code
Function
The cordless handset has a unique ID code. When the machine leaves the factory, the cordless
handset ID code is registered to the base unit, and the base ID code, to the cordless handset so that
the handset and base unit are exclusively paired. Once paired, they can identify each other and
initiate wireless communication between them.
Up to four cordless handset ID codes can be registered to the base unit.
This function allows you to check the cordless handset ID code registered in the handset.
Operating Procedure
(1) On the cordless handset, press the Menu/OK, *, 1, 9, 3, and 7 keys in this order in the standby
state.
The "SW VERSION" appears on the handset's LCD.
(2) Press the
The cordless handset displays its 10-digit ID code as shown below.
Handset
ID = XXXXXXXXXX
(3) To return to the standby state, press the C key twice.
9.2.3.4 Checking of Base ID Code
Function
The base unit (cordless PCB in the machine) has a unique ID code. When the machine leaves the
factory, the cordless handset ID code is registered to the base unit, and the base ID code, to the
cordless handset so that the handset and base unit are exclusively paired. Once paired, they can
identify each other and initiate wireless communication between them.
Up to four base ID codes (Base1, Base2, Base3, and Base4) can be registered to the cordless handset.
This function allows you to check the base ID code(s) registered in the handset.
Operating Procedure
(1) On the cordless handset, choose the desired base unit (Base1, Base2, Base3, or Base4) with the
following steps in the standby state.
1) Press the Menu/OK key.
2) Press the
3) Press the
4) Press the
(2) Press the Menu/OK, *, 1, 9, 3, and 7 keys in this order in the standby state.
The cordless handset displays "SW VERSION."
or key to display "TEST IPUI" and press the Menu/OK key.
or key to choose HS Settings. Then press the Menu/OK key.
or key to choose Select BASE. Then press the Menu/OK key.
or key to choose the desired base unit. Then press the Menu/OK key.
9-62
Confidential