Brother MFC260C Service Manual page 319

(7) To select the paper feed roller adjustment, press the 1 key.
The "PF ADJ NO. +0" appears on the LCD.
(8) Out of the three rows of the "PF adjust check" pattern (on the next page), check the middle row
and select the block that is the least uneven print. Make a note of that block number.
If the least unevenness seems to be far to the left of -8, regard it as -8; if it seems to be far to the
right of +8, regard it as +8. In this case, you need to check whether the paper feed roller and
head/carriage unit are set into place.
(9) Enter the number of the least uneven block found in step (8).
For example, if the number of the least uneven block is +4, press the 4 key when the "PF ADJ
NO. +0" is displayed on the LCD.
If the number is -4, press the
Then press the OK key, and the machine returns to the initial stage of the maintenance mode.
(10) On your PC, drag and drop the "exitadj.prn" onto the BHL2-Maintenance Printer icon in the
Filedrgs window.
The machine displays the "RECEIVING DATA" on the LCD and prints out three sheets of
"EXIT adjust check" pattern (on
(11) On the machine, press the 5 and 8 keys in this order.
The "1.PF 2.EXIT" appears on the LCD.
(12) To select the paper ejection roller adjustment, press the 2 key.
The "EXIT ADJ NO. +0" appears on the LCD.
(13) Out of the three sheets of the "EXIT adjust check" pattern (on
sheet and select the block that is the least uneven print. Make a note of that block number.
(14) Enter the number of the least uneven block found in step (13) in the same way as in step (9).
Then press the OK key, and the machine returns to the initial stage of the maintenance mode.
key to display the "PF ADJ NO. -0" and press the 4 key.
page 9-27 for a sample printout).
9-25
page 9-27), check the middle
Confidential