Brother MFC260C Service Manual page 176

Document pressure bar
(6) Place the ADF & document cover ASSY upside down.
(7) Press the lock arms on the ADF unit outwards, push the document pressure bar once to release
the two tabs from the square openings, and pull it out. The spring also comes off.
NOTE: When handling the document pressure bar, take care not to stain or scratch the white
reference film on the bar.
Lock arm
Document pressure bar
White reference film
Grounding wire
ADF motor harness
Spring
Tabs
Tabs
Spring
Square
openings
Lock arm
(Rear)
Document front sensor harness
Document rear sensor harness
6 - 1 7
When mounting the document pressure bar,
press the lock arms outwards, fully insert
this end and then fit the two tabs into the
square openings.
Lock arm
ADF & document cover ASSY
Lock arm
(6_15)
Confidential