Brother MFC260C Service Manual page 213

(17) Take out the ink supply tubes routed on the lower cover.
(18) While pressing the four lock release levers with your fingers, lift the ink refill ASSY up and
out of the lower cover.
NOTE: On the back of the ink refill ASSY is an ink absorber felt that may be stained with ink.
If it is excessively stained, replace it.
Ink supply tubes
Black
Yellow
Cyan
Magenta
Routing the Ink Supply Tubes
Magenta
Ink cartridge
sensor harness
Black
Yellow
Cyan
Sponge
Lower cover
6 - 5 4
Ink absorber felt (in this plastic case)
Head joint
(Rear)
Tube guide
When routing the ink supply tubes
through this tube guide, do not overlap
them with each other.
Lock release levers
Ink refill ASSY
Lower cover
(6_46)
Confidential