Brother MFC260C Service Manual page 225

• Insert the chassis support into the cutout provided in the right end of the engine chassis (see
6-63), not between the chassis and the lower cover.
• If you replace the engine unit, make adjustments specified in
• If you replace the flushing box (without replacing the main PCB), you also need to replace the
ink absorber box (see
in Chapter 7, Section
Section 6.1.16) and reset both the flushing and purge counters as specified
7.4.
6 - 6 6
Chapter 7, Section 7.2.
page
Confidential