Brother MFC260C Service Manual page 233

(4) Pull the four lock arms on the rear of the paper tray outwards and release the four latches of the
bank ASSY. Then pull the bank ASSY up and out of the paper tray.
(5) If the base pad needs to be replaced, peel it off the bottom of the paper tray.
NOTE: Once removed, the base pad will become unusable and a new pad will have to be put
back in.
Lock arm
Assembling Notes
• When attaching a new base pad to the paper tray, align the edge of the base pad with the front
edge of the depressed section on the paper tray as shown above.
• When mounting the bank ASSY, first insert the four tabs into the openings in the paper tray and
then press the inside of the bank ASSY so that the latches snap into place.
Bank ASSY
Base pad
Latch
Paper tray
Base pad
Depressed
section
Paper tray
Tabs
Unlatching the bank ASSY
Bank ASSY
6 - 7 4
Align the edge of the base pad
with the front edge of the
depressed section on the paper tray.
Paper tray
(6_65)
Confidential