Mj/Ps Shield Box And Power Supply Pcb - Brother MFC260C Service Manual

6.1.13 MJ/PS Shield Box and Power Supply PCB

(1) If the main PCB shield frame has not been removed, disconnect the power supply harness from
the main PCB and remove screw "d" (shown on
(2) Remove the two screws ("e" and "f").
(3) Remove the MJ/PS shield box from the underside of the lower cover.
Main-MJ (LINE) harness
Main-MJ (EXT) harness
"e"
"f"
Power supply harness
6 - 4 4
page 6-41) from the main PCB shield frame.
MJ/PS shield box
U-shaped cutout
"e": Screw, pan (s/p washer) M3x8
"f": Taptite, cup S M3x6
Lower cover
(6_38)
Confidential