Brother MFC260C Service Manual page 429

Selector
No.
1
Not used.
2
End-of-copying beep
3
(Not used.)
4
Command flag detection time
5
CCD warmup time adjustment
6
7
(Not used.)
8 Black ink print mode
Selectors 4 and 5: Command flag detection time
After receiving a command flag, the machine will wait for the command that should follow for the
time length specified by these selectors.
Selector 8: Black ink print mode
If any color ink runs out, printing is no longer possible by default. Setting this selector to "1" allows
the machine to ignore the ink empty state and print data with black ink only, resulting in a printout
missing color components.
Note: The assurance mode switch setting made by selector 3 on AMS04 (triggered with function
code 88 described in
data as a monochrome printer with black ink only.
WSW49
(End-of-copying beep and black ink print mode)
Function
Chapter 9, Section
App. 4-53
Setting and Specifications
0: Yes
No. 4 5
0 0 : 150 ms
0 1 : 350 ms
1 0 : 550 ms
1 1 : 750 ms
No. 6 7
0 0 : No adjustment
0 1 :
1 0 : 120%
1 1 : 150%
0: Disable (default)
9.1.4.25) allows the machine to print all color and black
1: No
80%
1: Enable
ms: millisecond(s)
Confidential